Metal Roofing – How to install Standing Seam Panel
If you ever decide to try installing metal roofing, make sure you remember a few things that experts have to say. The steps of installing metal roofing are rather easy. And yet, many people around us who make the adventurous decision to start installing metal roofing on their houses should know why the steps suggested by specialists must be taken.
Metal Panel Roofing In Maine
The first thing to do is to remove the old roof and also clear the surface of the roof of all possible leftover nails and rubble. It is really important that the surface be without any bumps or barbs which might have a negative impact on the roofing process and the expected and desired results. Furthermore, before you start installing metal roofing it is advisable to check the wood frame of the roof for termite signs. If there are signs that the wood in the frame has weakened and might not be able to bear the weight of the new roof or the pressure during the building period, you might reconsider your decision and think about replacing the wood structure in the first place.
The next important phase in installing metal roofing is to draw guidelines meant to help you laying down the sheets. While installing metal roofing, it is also very important that each sheet is made to overlap with the next one. If things are done by the book, then it is unlikely to get to have water leakages after installing metal roofing. The recommended overlap is of at least 5 inches.
Maine Metal Roofing
Installing metal roofing continues with installing the sheets and then with attaching the metal edging to surround the area of the roof. This edging is not realized only for aesthetic purposes, but it also seals off the wholes between the sheets and the base of the roof. Yet, to be certain that the gaps are sealed, put some rubber strips which will also prevent the appearance of insects in your roof.
Finally, it is time for installing the metal cap which is the very last step in installing metal roofing. A metal cap is attached to the crown with the help of screws, and then the gaps formed between the edge of the roofing cap and the actual roof surface can also be sealed off using caulk or rubber strips.
But now that you clearly understand the reasons behind each of the steps in installing, we hope that you will pay even more attention to the tiny details of your installation process and be even more thorough in doing all the steps. After all, the more successful you are in installing metal roofing, the better protected your house will be in the years to come.